WYBUR Tools 1-877-276-4787
   Products  (SF) Tree Burs, Radius End - Tungsten Carbide

(SF) Tree Burs, Radius End - Tungsten Carbide



(SF) Tree Burs, Radius End - Tungsten Carbide
SF (Ball-Nosed) Tree burs (also referred to as burrs) are used for deburring and finishing rounded openings and curvilinear surfaces. They are commonly used on castings and machine dies. They have a strong, heat- and wear-resistant (narrow) carbide head with slightly flared sides and a rounded tip; commonly used to remove excess material and sharp edges from machined components. They can also be used for grinding and shaping in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our (SF) Tree Carbide Burs are available in 1/4" and 1/8" shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.
Tree Radius End Bur, Double Cut (ADA) SKU W32.703 SF1

Tree Double Cut (ADC) Burs, Radius End


1/4" x 5/8"
with 1/4" shank
Part# W32.703


Tree Radius End Bur, Double Cut (ADA) SKU W32.706 SF3

Tree Double Cut (ADC) Burs, Radius End


3/8" x 3/4"
with 1/4" shank
Part# W32.706


Tree Radius End Bur, Double Cut (ADA) SKU W32.70603 SF4

Tree Double Cut (ADC) Burs, Radius End


7/16" x 1"
with 1/4" shank
Part# W32.70603


Tree Radius End Bur, Double Cut (ADA) SKU W32.709 SF5

Tree Double Cut (ADC) Burs, Radius End


1/2" x 1"
with 1/4" shank
Part# W32.709


Tree Radius End Bur, Double Cut (ADA) SKU W32.712 SF6

Tree Double Cut (ADC) Burs, Radius End


5/8" x 1"
with 1/4" shank
Part# W32.712


Tree Radius End Bur, Double Cut (ADA) SKU W32.71203 SF7

Tree Double Cut (ADC) Burs, Radius End


3/4" x 1"
with 1/4" shank
Part# W32.71203


Tree Radius End Bur, Double Cut (ADA) SKU W32.70611 SF13

Tree Double Cut (ADC) Burs, Radius End


1/2" x 3/4"
with 1/4" shank
Part# W32.70611


Tree Radius End Bur, Double Cut (ADA) SKU W32.70611 SF14

Tree Double Cut (ADC) Burs, Radius End


1-1/4" x 3/4"
with 1/4" shank
Part# W32.70611


Tree Radius End Bur, Double Cut (ADA) SKU W32.890 SF41

Tree Double Cut (ADC) Burs, Radius End


1/8" x 1/4"
with 1/8" shank
Part# W32.890


Tree Radius End Bur, Double Cut (ADA) SKU W32.893 SF42

Tree Double Cut (ADC) Burs, Radius End


1/8" x 1/2"
with 1/8" shank
Part# W32.893


Tree Radius End Bur, Double Cut (ADA) SKU W32.89333 SF42L

Tree Double Cut (ADC) Burs, Radius End


1/8" x 1/2"
with 1/8" shank
Part# W32.89333


Tree Radius End Bur, Double Cut (ADA) SKU W32.896 SF51

Tree Double Cut (ADC) Burs, Radius End


1/4" x 1/2"
with 1/8" shank
Part# W32.896


Tree Radius End Bur, Double Cut (ADA) SKU W32.89603 SF53

Tree Double Cut (ADC) Burs, Radius End


3/16" x 1/2"
with 1/8" shank
Part# W32.89603


Tree Radius End Bur, Double Cut (ADC), Extended Length SKU W32.94208 SF1L6

Tree Double Cut (ADC) Burs, Radius End, Extended Length


1/4" x 1/2"
with 1/4" shank
6" extended shank
Part# W32.94208


Tree Radius End Bur, Double Cut (ADC), Extended Length SKU W32.94213 SF3L6

Tree Double Cut (ADC) Burs, Radius End, Extended Length


3/8" x 3/4"
with 1/4" shank
6" extended shank
Part# W32.94213


Tree Radius End Bur, Double Cut (ADC), Extended Length SKU W32.94228 SF5L6

Tree Double Cut (ADC) Burs, Radius End, Extended Length


1/2" x 1"
with 1/4" shank
6" extended shank
Part# W32.94228



• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Tree Radius End Bur, Standard Cut SKU W32.702 SF1

Tree Standard Cut Burs, Radius End


1/4" x 5/8"
with 1/4" shank
Part# W32.702


Tree Radius End Bur, Standard Cut SKU W32.705 SF3

Tree Standard Cut Burs, Radius End


3/8" x 3/4"
with 1/4" shank
Part# W32.705


Tree Radius End Bur, Standard Cut SKU W32.70602 SF4

Tree Standard Cut Burs, Radius End


7/16" x 1"
with 1/4" shank
Part# W32.70602


Tree Radius End Bur, Standard Cut SKU W32.708 SF5

Tree Standard Cut Burs, Radius End


1/2" x 1"
with 1/4" shank
Part# W32.708


Tree Radius End Bur, Standard Cut SKU W32.711 SF6

Tree Standard Cut Burs, Radius End


5/8" x 1"
with 1/4" shank
Part# W32.711


Tree Radius End Bur, Standard Cut SKU W32.889 SF41

Tree Standard Cut Burs, Radius End


1/8" x 1/4"
with 1/8" shank
Part# W32.889


Tree Radius End Bur, Standard Cut SKU W32.892 SF42

Tree Standard Cut Burs, Radius End


1/8" x 1/2"
with 1/8" shank
Part# W32.892


Tree Radius End Bur, Standard Cut SKU W32.895 SF51

Tree Standard Cut Burs, Radius End


1/4" x 1/2"
with 1/8" shank
Part# W32.895


Tree Radius End Bur, Standard Cut, Extended Length SKU W32.94207 SF1L6

Tree Standard Cut Burs, Radius End, Extended Length


1/4" x 1/2"
with 1/4" shank
6" extended shank
Part# W32.94207


• Bear Cut Burs (Heavy-Duty)

Our Bear cut burs can significantly reduce manufacturing production costs and remove more material per hour thanks to the overall design and tooth cut. Developed for heavy-duty applications with wider teeth to produce longer chips which disintegrate easier. The tooth profile reduces their propensity to accumulate chips; this is because of the depth and durability of the teeth. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications such as shipbuilding, automotive, offshore drilling, and foundries.
Tree Radius End Bur, Bear Cut SKU W32.705SY SF3

Tree Bear Cut Burs, Radius End


3/8" x 3/4"
with 1/4" shank
Part# W32.705SY


Tree Radius End Bur, Bear Cut SKU W32.708SY SF5

Tree Bear Cut Burs, Radius End


1/2" x 1"
with 1/4" shank
Part# W32.708SY


Tree Radius End Bur, Bear Cut SKU W32.711SY SF6

Tree Bear Cut Burs, Radius End


5/8" x 1"
with 1/4" shank
Part# W32.711SY


Tree Radius End Bur, Bear Cut SKU W32.70610SY SF13

Tree Bear Cut Burs, Radius End


1/2" x 3/4"
with 1/4" shank
Part# W32.70610SY


• Aluma Cut Burs (NF)

Aluma cut carbide burs are for use on Aluminum, magnesium, soft steel and nonferrous materials such as hard plastic, rubber and wood. Provides easy chip flow and faster stock removal with little or no clogging.
SF1NF

Tree Aluma Cut (NF) Burs, Radius End


1/4" x 3/4"
with 1/4" shank
Part# W32.95705


SF3NF

Tree Aluma Cut (NF) Burs, Radius End


3/8" x 3/4"
with 1/4" shank
Part# W32.95711


SF5NF

Tree Aluma Cut (NF) Burs, Radius End


1/2" x 1"
with 1/4" shank
Part# W32.95717


SF6NF

Tree Aluma Cut (NF) Burs, Radius End


5/8" x 1"
with 1/4" shank
Part# W32.95720