Products
(SB) Cylinder Burs, End Cut - Tungsten Carbide
Cylindrical burs (also referred to as burrs) have a strong, heat- and wear-resistant carbide head used to remove excess material and sharp edges from machined components. They are suitable for deburring or refining flat and right-angled surfaces, grinding, shaping, and the cutting of varies materials. The End Cut (SB) Cylinder Bur feature's fluted sides and end, can be used in pendant drills, high-speed engravers, and die grinders.
- Our (SB) Cylindrical Carbide Burs are available in 1/4" and 1/8" shank diameters.
- Proudly made right here in the USA.
Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.
SB1
Cylindrical Double Cut Burs (ADC), End Cut
1/4" x 5/8"
with 1/4" shank
Part# W32.580
SB1L
Cylindrical Double Cut Burs (ADC), End Cut
1/4" x 1"
with 1/4" shank
Part# W32.58003
SB2
Cylindrical Double Cut Burs (ADC), End Cut
5/16" x 3/4"
with 1/4" shank
Part# W32.583
SB3
Cylindrical Double Cut Burs (ADC), End Cut
3/8" x 3/4"
with 1/4" shank
Part# W32.586
SB3L
Cylindrical Double Cut Burs (ADC), End Cut
3/8" x 1"
with 1/4" shank
Part# W32.58603
SB5
Cylindrical Double Cut Burs (ADC), End Cut
1/2" x 1"
with 1/4" shank
Part# W32.589
SB6
Cylindrical Double Cut Burs (ADC), End Cut
5/8" x 1"
with 1/4" shank
Part# W32.592
SB11
Cylindrical Double Cut Burs (ADC), End Cut
1/8" x 1/2"
with 1/4" shank
Part# 32.574
SB14
Cylindrical Double Cut Burs (ADC), End Cut
3/16" x 5/8"
with 1/4" shank
Part# W32577
SB16
Cylindrical Double Cut Burs (ADC), End Cut
3/4" x 3/4"
with 1/4" shank
Part# W32.595
SB43
Cylindrical Double Cut Burs (ADC), End Cut
1/8" x 9/16"
with 1/8" shank
Part# W32.83903
SB51
Cylindrical Double Cut Burs (ADC), End Cut
1/4" x 3/16"
with 1/8" shank
Part# W32.83911
The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
SB1
Cylindrical Standard Burs, End Cut
1/4" x 5/8"
with 1/4" shank
Part# W32.579
SB1L
Cylindrical Standard Burs, End Cut
1/4" x 1"
with 1/4" shank
Part# W32.58002
SB2
Cylindrical Standard Burs, End Cut
5/16" x 3/4"
with 1/4" shank
Part# W32.582
SB3
Cylindrical Standard Burs, End Cut
3/8" x 3/4"
with 1/4" shank
Part# W32.585
SB5
Cylindrical Standard Burs, End Cut
1/2" x 1"
with 1/4" shank
Part# W32.588
SB6
Cylindrical Standard Burs, End Cut
5/8" x 1"
with 1/4" shank
Part# W32.591
SB7
Cylindrical Standard Burs, End Cut
3/4" x 1"
with 1/4" shank
Part# W32.597
SB9
Cylindrical Standard Burs, End Cut
1" x 1"
with 1/4" shank
Part# W32.600
SB11
Cylindrical Standard Burs, End Cut
1/8" x 1/2"
with 1/4" shank
Part# W32.573
SB14
Cylindrical Standard Burs, End Cut
3/16" x 5/8"
with 1/4" shank
Part# W32.576
SB43
Cylindrical Standard Burs, End Cut
1/8" x 9/16"
with 1/8" shank
Part# W32.83902