Products
(SA) Cylinder Burs, Plain Cut - Tungsten Carbide
Cylindrical burs (also referred to as burrs) have a strong, heat- and wear-resistant carbide head used to remove excess material and sharp edges from machined components. They are suitable for deburring or refining flat and right-angled surfaces, grinding, shaping, and the cutting of varies materials. The Plain End (SA) Cylinder Bur is the most common shaped bur and features a flat end, fluted sides, and can be used in jewelers pendant drills, high-speed engravers, and die grinders.
- Our (SA) Cylindrical Carbide Burs are available in 1/4" and 1/8" shank diameters.
- Proudly made right here in the USA.
Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.
SA11Cylindrical Double Cut (ADC) Burs, Plain End
1/8" x 1/2"
with 1/4" shank
Part# W32.541
SA14Cylindrical Double Cut (ADC) Burs, Plain End
3/16" x 5/8"
with 1/4" shank
Part# W32.544
SA1Cylindrical Double Cut (ADC) Burs, Plain End
1/4" x 5/8"
with 1/4" shank
Part# W32.547
SA1LCylindrical Double Cut (ADC) Burs, Plain End
1/4" x 1"
with 1/4" shank
Part# W32.54703
SA2Cylindrical Double Cut (ADC) Burs, Plain End
5/16" x 3/4"
with 1/4" shank
Part# W32.550
SA3Cylindrical Double Cut (ADC) Burs, Plain End
3/8" x 3/4"
with 1/4" shank
Part# W32.553
SA3LCylindrical Double Cut (ADC) Burs, Plain End
3/8" x 1"
with 1/4" shank
Item No. W32.55303
SA4Cylindrical Double Cut (ADC) Burs, Plain End
7/16" x 1"
with 1/4" shank
Part# W32.55321
SA5Cylindrical Double Cut (ADC) Burs, Plain End
1/2" x 1"
with 1/4" shank
Part# W32.556
SA6Cylindrical Double Cut (ADC) Burs, Plain End
5/8" x 1"
with 1/4" shank
Part# W32.559
SA7Cylindrical Double Cut (ADC) Burs, Plain End
3/4" x 1"
with 1/4" shank
Part# W32.565
SA9Cylindrical Double Cut (ADC) Burs, Plain End
1" x 1"
with 1/4" shank
Part# W32.568
SA63Cylindrical Double Cut (ADC) Burs, Plain End
3/32" x 3/8"
with 3/32" shank
Part# W32.815
SA41Cylindrical Double Cut (ADC) Burs, Plain End
1/16" x 1/4"
with 1/8" shank
Part# W32.81503
SA42Cylindrical Double Cut (ADC) Burs, Plain End
3/32" x 1/2"
with 1/8" shank
Part# W32.833
SA43Cylindrical Double Cut (ADC) Burs, Plain End
1/8" x 9/16"
with 1/8" shank
Part# W32.836
SA51Cylindrical Double Cut (ADC) Burs, Plain End
1/4" x 1/2"
with 1/8" shank
Part# W32.839
SA1L6Cylindrical Double Cut (ADC) Burs, Plain End
1/4" x 1/2"
with 1/4" shank
6" extended shank
Part# W32.93523
SA3L6Cylindrical Double Cut (ADC) Burs, Plain End
3/8" x 3/4"
with 1/4" shank
6" extended shank
Part# W32.93538
SA5L6Cylindrical Double Cut (ADC) Burs, Plain End
1/2" x 1"
with 1/4" shank
6" extended shank
Part# W32.93558
The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
SA14Cylindrical Standard Cut Burs, Plain End
3/16" x 5/8"
with 1/4" shank
Part# W32.543
SA1Cylindrical Standard Cut Burs, Plain End
1/4" x 5/8"
with 1/4" shank
Part# W32.546
SA1LCylindrical Standard Cut Burs, Plain End
1/4" x 1"
with 1/4" shank
Part# W32.54702
SA2Cylindrical Standard Cut Burs, Plain End
5/16" x 3/4"
with 1/4" shank
Part# W32.549
SA3Cylindrical Standard Cut Burs, Plain End
3/8" x 3/4"
with 1/4" shank
Part# W32.552
SA5Cylindrical Standard Cut Burs, Plain End
1/2" x 1"
with 1/4" shank
Part# W32.555
SA6Cylindrical Standard Cut Burs, Plain End
5/8" x 1"
with 1/4" shank
Part# W32.558
SA9Cylindrical Standard Cut Burs, Plain End
1" x 1"
with 1/4" shank
Part# W32.567
SA62Cylindrical Standard Cut Burs, Plain End
5/64" x 5/16"
with 3/32" shank
Part# W32.810
SA63Cylindrical Standard Cut Burs, Plain End
3/32" x 3/8"
with 3/32" shank
Part# W32.814
SA41Cylindrical Standard Cut Burs, Plain End
1/16" x 1/4"
with 1/8" shank
Part# W32.81502
SA42Cylindrical Standard Cut Burs, Plain End
1/16" x 1/4"
with 1/8" shank
Part# W32.832
SA43Cylindrical Standard Cut Burs, Plain End
1/8" x 9/16"
with 1/8" shank
Part# W32.835
SA51Cylindrical Standard Cut Burs, Plain End
1/4" x 1/2"
with 1/8" shank
Part# W32.838
SA1L6Cylindrical Standard Cut Burs, Plain End
1/4" x 1/2"
with 1/4" shank
6" extended shank
Part# W32.93522
SA3L6Cylindrical Standard Cut Burs, Plain End
3/8" x 3/4"
with 1/4" shank
6" extended shank
Part# W32.93537
Our Bear cut burs can significantly reduce manufacturing production costs and remove more material per hour thanks to the overall design and tooth cut. Developed for heavy-duty applications with wider teeth to produce longer chips which disintegrate easier. The tooth profile reduces their propensity to accumulate chips; this is because of the depth and durability of the teeth. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications such as shipbuilding, automotive, offshore drilling, and foundries.
SA1Cylindrical Bear Cut Burs, Plain End
1/4" x 5/8"
with 1/4" shank
Part# W32.546SY
SA3Cylindrical Bear Cut Burs, Plain End
3/8" x 3/4"
with 1/4" shank
Part# W32.552SY
SA4Cylindrical Bear Cuts Burs, Plain End
7/16" x 1"
with 1/4" shank
Part# W32.55320SY
SA5Cylindrical Bear Cut Burs, Plain End
1/2" x 1"
with 1/4" shank
Part# W32.555SY
SA6Cylindrical Bear Cut Burs, Plain End
5/8" x 1"
with 1/4" shank
Part# W32.558SY
High-quality, Aluma cut, carbide burs can be used on aluminum, magnesium, soft steel, hard plastic, rubber, and wood. They provide easy chip flow and faster stock removal with little to no clogging.
SA1NFCylindrical Aluma Cut (NF) Burs, Plain End
1/4" x 5/8"
with 1/4" shank
Part# W32.95002
SA3NFCylindrical Aluma Cut (NF) Burs, Plain End
3/8" x 3/4"
with 1/4" shank
Part# W32.95011
SA5NFCylindrical Aluma Cut (NF) Burs, Plain End
1/2" x 1"
with 1/4" shank
Part# W32.95017
SA7NFCylindrical Aluma Cut (NF) Burs, Plain End
3/4" x 1"
with 1/4" shank
Part# W32.95023