WYBUR Tools 1-877-276-4787
   Products  Metric Tree Pointed End Burs - Tungsten Carbide


Metric Tree Burs, Radius End - Tungsten Carbide



Metric Tree Burs, Radius End - Tungsten Carbide
Our Metric Ball-Nosed Tree burs (also referred to as burrs) are used for deburring and finishing rounded openings and curvilinear surfaces. They are commonly used on castings and machine dies. They have a strong, heat- and wear-resistant (narrow) carbide head with slightly flared sides and a rounded tip; commonly used to remove excess material and sharp edges from machined components. They can also be used for grinding and shaping in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our Metric Tree Carbide Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.

Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-0313-3-5 Metric

Tree Radius Double Cut Burs (ADC)


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFF-0313-3-5



Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-0613-3-5 Metric

Tree Radius Double Cut Burs (ADC)


6.4mm x 12.7mm x 51mm
with 3mm shank
Part#
WGFF-0613-3-5



Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-0819-6-5 Metric

Tree Radius Double Cut Burs (ADC)


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-0819-6-5



Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-0819-6-5 Metric

Tree Radius Double Cut Burs (ADC)


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-1019-6-5



Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-1325-6-5 Metric

Tree Radius Double Cut Burs (ADC)


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1325-6-5



Metric Tree Radius End End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFF-1625-6-5 Metric

Tree Radius Double Cut Burs (ADC)


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1625-6-5


• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Metric Tree Radius End End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFF-0313-3-2 Metric

Tree Radius Standard Cut Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFF-0313-3-2


Metric Tree Radius End End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFF-0616-6-2 Metric

Tree Radius Standard Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFF-0616-6-2


Metric Tree Radius End End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFF-1019-6-2 Metric

Tree Radius Standard Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-1019-6-2


Metric Tree Radius End End Burs, 12.7mm x 25.4mm x 70mm, Metric, Item No. GFF-1325-6-2 Metric

Tree Radius Standard Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1325-6-2


Metric Tree Radius End End Burs, 12.7mm x 25.4mm x 70mm, Metric, Item No. GFF-1625-6-2 Metric

Tree Radius Standard Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1625-6-2


• Bear Cut Burs (Heavy-Duty)

We have specially designed and engineered our Bear burs for use in tough operating conditions. They have a much deeper fluting than conventional double cut burs and give superior performance. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications; shipbuilding, automotive, offshore drilling, and foundries.
Metric Tree Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFF-1019-6-SY Metric

Tree Radius Bear Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-1019-6-SY


Metric Tree Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFF-1325-6-SY Metric

Tree Radius Bear Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1325-6-SY


Metric Tree Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFF-1625-6-SY Metric

Tree Radius Bear Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1625-6-SY


• Aluma Cut Burs (NF)

This cut is for use on aluminum, magnesium, soft steel and nonferrous materials such as hard plastic, rubber and wood. Provides easy chip flow and faster stock removal with little or no clogging.
Metric Tree Radius End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFF-1325-6-1 Metric

Tree Radius Aluma Cut (NF) Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1325-6-1


• Chipbreaker Burs

Our Chipbreaker Tree Shape Pointed End Burs are suitable for deburring or refining flat and right-angled surfaces, grinding, shaping, and the cutting of varies materials.

Chipbreaker Metric Tree Shape Radius End Burs, 3mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. WGFF-0306-3-38 Metric

Tree Radius Chipbreaker Burs


3mm x 6.4mm x 38mm
with 3mm shank
Part#
WGFF-0306-3-3



Chipbreaker Metric Tree Shape Radius End Burs, 3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFF-0313-3-38 Metric

Tree Radius Chipbreaker Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFF-0313-3-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-0616-6-51 Metric

Tree Radius Chipbreaker Burs


6.4mm x 12.mm x 51mm
with 3mm shank
Part#
WGFF-0612-3-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-0819-6-51 Metric

Tree Radius Chipbreaker Burs


6mm x15.9mm x 51mm
with 6mm shank
Part#
WGFF-0616-6



Chipbreaker Metric Tree Shape Radius End Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 51mm overall length, Item No. WGFF-0819-6-51 Metric

Tree Radius Chipbreaker Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-0819-6-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-1019-6-64 Metric

Tree Radius Chipbreaker Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-1019-6-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-1125-6-70 Metric

Tree Radius Chipbreaker Burs


11.1mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1125-6-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-1319-6-64 Metric

Tree Radius Chipbreaker Burs


12.7mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFF-1319-6-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-1325-6-70 Metric

Tree Radius Chipbreaker Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1325-6-3



Chipbreaker Metric Tree Shape Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFF-1625-6-70 Metric

Tree Radius Chipbreaker Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFF-1625-6-3