WYBUR Tools 1-877-276-4787
   Products  Metric Tree Pointed End Burs - Tungsten Carbide


Metric Tree Burs, Pointed End - Tungsten Carbide



Metric Tree Burs, Pointed - Tungsten Carbide
Metric Tree burs (also spelled burrs) are used for deburring and finishing rounded openings and curvilinear surfaces. They are used to deburr castings and machine dies. Our Metric Tree Burs have a strong, heat- and wear-resistant (narrow) carbide head with slightly flared sides and a tapered tip; commonly used to remove excess, sharp-edged material from machined components. They can also be used for grinding and shaping in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our Metric Tree Carbide Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.

Metric Tree Pointed End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFG-0616-6-5 Metric

Tree Pointed End Double Cut (ADC) Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFG-0616-6-5



Metric Tree Pointed End Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. GFG-0819-6-5 Metric

Tree Pointed End Double Cut (ADC) Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFG-0819-6-5



Metric Tree Pointed End Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. GFG-1019-6-5 Metric

Tree Pointed End Double Cut (ADC) Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFG-1019-6-5



Metric Tree Pointed End Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. GFG-1325-6-5 Metric

Tree Pointed End Double Cut (ADC) Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFG-1325-6-5


• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Metric Tree Pointed End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0213-3-2 Metric

Tree Pointed End Standard Cut Burs


6.4mm x 12.7mm x 51mm
with 3mm shank
Part#
WGFG-0613-3-2


Metric Tree Pointed End, 3mm x 12.7mm x 38mm, Metric, Item No. GFE-1322-6-2 Metric

Tree Pointed End Standard Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFG-1019-6-2


Metric Tree Pointed End, 3mm x 12.7mm x 38mm, Metric, Item No. GFG-1325-6-2 Metric

Tree Pointed End Standard Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFG-1325-6-2


Metric Tree Pointed End, 3mm x 12.7mm x 38mm, Metric, Item No. GFG-1625-6-2 Metric

Tree Pointed End Standard Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFG-1625-6-2


• Bear Cut Burs (Heavy-Duty)

We have specially designed and engineered our Bear burs for use in tough operating conditions. They have a much deeper fluting than conventional double cut burs and give superior performance. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications; shipbuilding, automotive, offshore drilling, and foundries.
Metric Oval End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFG-1019-6-SY Metric

Tree Pointed End Bear Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFG-1019-6-SY


Metric Oval End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFG-1319-6-SY Metric

Tree Pointed End Bear Cut Burs


12.7mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFG-1319-6-SY


Metric Oval End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFG-1325-6-SY Metric

Tree Pointed End Bear Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFG-1325-6-SY


• Aluma Cut Burs (NF)

This cut is for use on aluminum, magnesium, soft steel and nonferrous materials such as hard plastic, rubber and wood. Provides easy chip flow and faster stock removal with little or no clogging.
Metric Tree Pointed End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFG-1325-6-1 Metric

Tree Pointed End Aluma Cut (NF) Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFG-1325-6-1


• Chipbreaker Cut Burs

Our Chipbreaker Tree Shape Pointed End Burs are suitable for deburring or refining flat and right-angled surfaces, grinding, shaping, and the cutting of varies materials.

Chipbreaker Metric Tree Shape Pointed End Burs, 2.4mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. WGFG-0206-3-38 Metric

Tree Pointed End Chipbreaker Cut Burs


2.4mm x 6.4mm x 38mm
with 3mm shank
Part#
WGFG-0206-3-3



Chipbreaker Metric Tree Shape Pointed End Burs, 3mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. WGFF-0306-3-38 Metric

Tree Pointed End Chipbreaker Cut Burs


3mm x 6.4mm x 38mm
with 3mm shank
Part#
WGFG-0306-3-3



Chipbreaker Metric Tree Shape Pointed End Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFG-0310-3-38 Metric

Tree Pointed End Chipbreaker Cut Burs


3mm x 9.5mm x 38mm
with 3mm shank
Part#
WGFG-0310-3-3



Chipbreaker Metric Tree Shape Pointed End Burs, 3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFF-0313-3-38 Metric

Tree Pointed End Chipbreaker Cut Burs


3mm x12.7mm x 38mm
with 3mm shank
Part#
WGFG-0313-3-3



Chipbreaker Metric Tree Shape Pointed End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFG-0616-6-51 Metric

Tree Pointed End Chipbreaker Cut Burs


6mm x15.9mm x 51mm
with 6mm shank
Part#
WGFG-0616-6-3



Chipbreaker Metric Tree Shape Pointed End Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFG-0819-6-64 Metric

Tree Pointed End Chipbreaker Cut Burs


7.9mm x19.1mm x 64mm
with 6mm shank
Part#
WGFG-0819-6-3



Chipbreaker Metric Tree Shape Pointed End Burs, 9.5mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFG-1019-6-64 Metric

Tree Pointed End Chipbreaker Cut Burs


9.5mm x19.1mm x 64mm
with 6mm shank
Part#
WGFG-1019-6-3



Chipbreaker Metric Tree Shape Pointed End Burs, 9.5mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFG-1319-6-64 Metric

Tree Pointed End Chipbreaker Cut Burs


12.7mm x19.1mm x 64mm
with 6mm shank
Part#
WGFG-1319-6-3



Chipbreaker Metric Tree Shape Pointed End Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFG-1325-6-70 Metric

Tree Pointed End Chipbreaker Cut Burs


12.7mm x25.4mm x 70mm
with 6mm shank
Part#
WGFG-1325-6-3



Chipbreaker Metric Tree Shape Pointed End Burs, 15.9mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFG-1625-6-70 Metric

Tree Pointed End Chipbreaker Cut Burs


15.9mm x25.4mm x 70mm
with 6mm shank
Part#
WGFG-1625-6-3