WYBUR Tools 1-877-276-4787
   Products  Metric Cylinder Radius End Burs - Tungsten Carbide


Metric Cylinder Burs, Radius End - Tungsten Carbide



Metric Cylinder Burs, Radius End - Tungsten Carbide
Metric Cylindrical burs (also referred to as burrs) have a strong, heat- and wear-resistant carbide head used to remove excess material and sharp edges from machined components. Our Metric Radius End Cylindrical Burs are suitable for deburring or refining freshly cut edges, convex / concave surfaces, slots, and recesses. The Cylinder Bur is the most common shaped bur. The Radius End features a rounded cutting head and flutes on their sides and radius end. They can be used in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our Metric Cylindrical Radius-End Carbide Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.

Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0213-3-5 Metric

Cylinder Radius Double Cut (ADC) Burs


2.4mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFC-0213-3-5



Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0313-3-5 Metric

Cylinder Radius Double Cut (ADC) Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFC-0313-3-5



Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0616-6-5 Metric

Cylinder Radius Double Cut (ADC) Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0616-6-5



Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0819-6-5 Metric

Cylinder Radius Double Cut (ADC) Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-0819-6-5



Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0819-6-5 Metric

Cylinder Radius Double Cut (ADC) Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-1019-6-5



Metric Cylinder Radius End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFC-0819-6-5 Metric

Cylinder Radius Double Cut (ADC) Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1325-6-5


• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0213-3-2 Metric

Cylinder Radius Standard Cut Burs


2.4mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFC-0213-3-2


Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0213-3-2 Metric

Cylinder Radius Standard Cut Burs


3mm x 12.7mm x 38mm
with 6mm shank
Part#
WGFC-0313-3-2


Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0313-3-2 Metric

Cylinder Radius Standard Cut Burs


4.8mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0516-6-2


Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFC-0616-6-2 Metric

Cylinder Radius Standard Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0616-6-2


Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFC-0616-6-2 Metric

Cylinder Radius Standard Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-1019-6-2


Metric Cylinder Radius End Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFC-1325-6-2 Metric

Cylinder Radius Standard Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1325-6-2


• Bear Cut Burs (Heavy-Duty)

We have specially designed and engineered our Bear burs for use in tough operating conditions. They have a much deeper fluting than conventional double cut burs and give superior performance. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications; shipbuilding, automotive, offshore drilling, and foundries.
Metric Cylinder Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFC-1019-6-SY Metric

Cylinder Radius Bear Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-1019-6-SY


Metric Cylinder Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFC-1019-6-SY Metric

Cylinder Radius Bear Cut Burs


11.1mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1125-6-SY


Metric Cylinder Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFC-1325-6-SY Metric

Cylinder Radius Bear Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1325-6-SY


Metric Cylinder Radius End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFC-1625-6-SY Metric

Cylinder Radius Bear Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1625-6-SY


• Aluma Cut Burs (NF)

This cut is for use on aluminum, magnesium, soft steel and nonferrous materials such as hard plastic, rubber and wood. Provides easy chip flow and faster stock removal with little or no clogging.
Metric Cylinder Radius End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFA-1019-6-1 Metric

Cylinder Radius Aluma Cut (NF) Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-1019-6-3


Metric Cylinder Radius End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFC-1325-6-1 Metric

Cylinder Radius Aluma Cut (NF) Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1325-6-3


• Chipbreaker Cut Burs

Our Chipbreaker Radius End Cylindrical Burs are suitable for deburring or refining freshly cut edges, convex / concave surfaces, slots, and recesses.

Chipbreaker Cylinder Shape Radius End Burs, 2.4mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFC-0213-3-38 Metric

Cylinder Radius Chipbreaker Cut Burs


2.4mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFC-0213-3-3



Chipbreaker Cylinder Shape Radius End Burs, 3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFC-0313-3-3 Metric

Cylinder Radius Chipbreaker Cut Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFC-0313-3-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 6.4mm cutting head dia. x 12.7mm length of cut, with 51mm overall length, Item No. WGFC-0613-3-51 Metric

Cylinder Radius Chipbreaker Cut Burs


6.4mm x 12.7mm x 51mm
with 3mm shank
Part#
WGFC-0613-3-3



Chipbreaker Metric Cylinder Shaped Radius End Burs, 3mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFC-0316-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


3mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0316-6-3



Chipbreaker Metric Cylinder Shaped Radius End Burs, 9.1mm cutting head dia. x 38mm length of cut, with 38mm overall length, Item No. WGFC-0516-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


4.8mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0516-6-3



Chipbreaker Metric Cylinder Shaped Radius End Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFC-0616-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFC-0616-6-3



Chipbreaker Cylinder Shape Radius End, Tungsten Carbide Burs, 6mm cutting head dia. x 25.4mm length of cut, with 51mm overall length, Item No. WGFC-0625-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


6mm x 25.4mm x 51mm
with 6mm shank
Part#
WGFC-0625-6-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFC-0819-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-0819-6-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 9.5mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFC-1019-6-64 Metric

Cylinder Radius Chipbreaker Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFC-1019-6-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 9.5mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFC-1025-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


9.5mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1025-6-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 9.1mm cutting head dia. x 38mm length of cut, with 38mm overall length, Item No. WGFC-1325-6-3 Metric

Cylinder Radius Chipbreaker Cut Burs


12.7mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFC-1325-6-3



Chipbreaker Metric Cylinder Readius End Burs, 15.9mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFC-1625-6-70 Metric

Cylinder Radius Chipbreaker Cut Burs


15.9mm x 25.4mm x70mm
with 6mm shank
Part#
WGFC-1625-6-3



Chipbreaker Metric Cylinder Radius End Cut Burs, 19.1mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFC-1925-6-70 Metric

Cylinder Radius Chipbreaker Cut Burs


19.1mm x 25.4mm x70mm
with 6mm shank
Part#
WGFC-1925-6-3


Our Company
About DesignatronicsOur Management ApproachOur CertificationsPress Releases and Events
Brands
SDP/SI - Stock Drive Products / Sterling Instrument QTC METRIC GEARSQuality Bearings and ComponentsWYBUR Tools
General Information
Terms and ConditionsPrivacy PolicyCode of Conduct PolicyPaperless Invoices
Connect
FacebookInstagramLinkedinX (Twitter)