WYBUR Tools 1-877-276-4787
   Products  Metric Cylinder End Cut Burs - Tungsten Carbide


Metric Cylinder Burs, Plain End - Tungsten Carbide



Metric Cylinder Burs, Plain End - Tungsten Carbide
Our Metric Cylindrical burs (also referred to as burrs) have a strong, heat- and wear-resistant carbide head used to remove excess material and sharp edges from machined components. They are suitable for deburring or refining flat and right-angled surfaces, grinding, shaping, and the cutting of varies materials. The Plain End Metric Cylinder Bur is the most common shaped bur and features a flat end, fluted sides, and can be used in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our Metric Cylindrical Carbide Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.


Metric Cylinder Plain End Burs, 1.6mm cutting head dia. x 6.4mm length of cut, with 38mm overall length, Item No. GFA-0313-3-5E Metric

Cylinder Plain End Double Cut (ADC) Burs


1.6mm x 6.4mm x 38mm
with 3mm shank
Part#
WGFA-0206-3-5



Metric Cylinder Plain End Burs, 2.4mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. GFA-0213-3-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


2.4mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFA-0213-3-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. GFA-0313-3-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFA-0313-3-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 14.3mm length of cut, with 38mm overall length, Item No. GFA-0313-3-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


3mm x 14.3mm x 38mm
with 3mm shank
Part#
WGFA-0314-3-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 14.3mm length of cut, with 38mm overall length, Item No. GFA-0616-6-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFA-0616-6-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 14.3mm length of cut, with 38mm overall length, Item No. GFA-0616-6-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-0616-6-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 14.3mm length of cut, with 38mm overall length, Item No. GFA-0616-6-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-1019-6-5


Metric Cylinder Plain End Burs, 3mm cutting head dia. x 14.3mm length of cut, with 38mm overall length, Item No. GFA-1325-6-5 Metric

Cylinder Plain End Double Cut (ADC) Burs


13mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1325-6-5



• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0313-3-2 Metric

Cylinder Plain End Standard Cut Burs


3mm x 12.7mm x 38mm
with 6mm shank
Part#
WGFA-0313-3-2


Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0313-3-2 Metric

Cylinder Plain End Standard Cut Burs


3mm x 14.3mm x 38mm
with 6mm shank
Part#
WGFA-0314-3-2


Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0313-3-2 Metric

Cylinder Plain End Standard Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFA-0616-6-2


Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-0313-3-2 Metric

Cylinder Plain End Standard Cut Burs


9.5mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1025-6-2


Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-1325-6-2 Metric

Cylinder Plain End Standard Cut Burs


13mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1325-6-2


Metric Cylinder End Cut Burs, 3mm x 12.7mm x 38mm, Metric, Item No. GFA-1625-6-2 Metric

Cylinder Plain End Standard Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1625-6-2


• Bear Cut Burs (Heavy-Duty)

We have specially designed and engineered our Bear burs for use in tough operating conditions. They have a much deeper fluting than conventional double cut burs and give superior performance. Perfect choice for use on mild steel, stainless steel, metal alloys and cast iron. Ideal for heavy duty applications; shipbuilding, automotive, offshore drilling, and foundries.
Metric Cylinder Plain End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFA-0616-6-SY Metric

Cylinder Plain End Bear Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFA-0616-6-SY


Metric Cylinder Plain End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFA-0616-6-SY Metric

Cylinder Plain End Bear Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-1019-6-SY


Metric Cylinder Plain End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFA-1125-6-SY Metric

Cylinder Plain End Bear Cut Burs


11.1mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1125-6-SY


Metric Cylinder Plain End Burs, 9.5mm x 19.1mm x 64mm, Metric, Item No. GFA-1125-6-SY Metric

Cylinder Plain End Bear Cut Burs


13mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1325-6-SY


Metric Cylinder Plain End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFA-1625-6-SY Metric

Cylinder Plain End Bear Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1625-6-SY


• Aluma Cut Burs (NF)

This cut is for use on aluminum, magnesium, soft steel and nonferrous materials such as hard plastic, rubber and wood. Provides easy chip flow and faster stock removal with little or no clogging.
Metric Cylinder Plain End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFA-1019-6-1 Metric

Cylinder Plain End Aluma Cut (NF) Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-1019-6-1


Metric Cylinder Plain End Burs, 13mm x 25.4mm x 70mm, Metric, Item No. GFA-1325-6-1 Metric

Cylinder Plain End Aluma Cut (NF) Burs


13mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1325-6-1


• Chipbreaker Cut Burs

Our Chipbreaker Cylindrical burs are used for tempered, unhardened steel, cast steel and weld seams.

Chipbreaker Metric Cylinder End Cut Burs, 2mm cutting head dia. x 9.5mm length of cut, with 38mm overall length, Item No. WGFA-0210-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


2.4mm x 9.5mm x 38mm
with 3mm shank
Part#
WGFA-0210-3-3



Chipbreaker Metric Cylinder End Cut Burs, 3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFA-0313-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFA-0313-3-3



Chipbreaker Metric Cylinder End Cut Burs, 6.4mm cutting head dia. x 12.7mm length of cut, with 51mm overall length, Item No. WGFA-0613-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


6.4mm x 12.7mm x 51mm
with 3mm shank
Part#
WGFA-0613-3-3



Chipbreaker Metric Cylinder End Cut Burs, 4mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFA-0416-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


4mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFA-0416-3-3



Chipbreaker Metric Cylinder End Cut Burs, 6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFA-0616-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFA-0616-6-3



Chipbreaker Metric Cylinder End Cut Burs, 7.9mm cutting head dia. x 19.1mm length of cut, with 51mm overall length, Item No. WGFA-0819-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


7.9mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-0819-6-3



Chipbreaker Metric Cylinder End Cut Burs, 9.5mm cutting head dia. x 19.1mm length of cut, with 64mm overall length, Item No. WGFA-1019-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


9.5mm x 19.1mm x 64mm
with 6mm shank
Part#
WGFA-1019-6-3



Chipbreaker Metric Cylinder End Cut Burs, 9.5mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFA-1025-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


9.5mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1025-6-3



Chipbreaker Metric Cylinder End Cut Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFA-1038-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


9.5mm x 38.1mm x 83mm
with 6mm shank
Part#
WGFA-1038-6-3



Chipbreaker Metric Cylinder End Cut Burs, 13mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFA-1325-6-3 Metric

Cylinder Plain End Chipbreaker Cut Burs


13mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1325-6-3



Chipbreaker Metric Cylinder End Cut Burs, 15.9mm cutting head dia. x 25.4mm length of cut, with 70mm overall length, Item No. WGFA-1625-6-70 Metric

Cylinder Plain End Chipbreaker Cut Burs


15.9mm x 25.4mm x 70mm
with 6mm shank
Part#
WGFA-1625-6-3