WYBUR Tools 1-877-276-4787
   Products  Metric Cone Shaped Burs With Radius End - Tungsten Carbide


Metric Cone Burs, Radius End - Tungsten Carbide



Metric Cone Burs, Radius End - Tungsten Carbide
Metric cone burs can deburr without altering the shape of a surface. They can also fit into narrow areas with tight angles. They have a strong, heat- and wear-resistant (narrow) carbide head with and a rounded tip; commonly used to remove excess material and sharp edges from machined components. They can also be used for grinding and shaping in jewelers pendant drills, high-speed engravers, and die grinders.

  • Our Metric Carbide Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.
• Double Cut Burs (ADC)

Basically a standard cutting tool, cuts are performed along the left-hand spiral. Double Cut Burs have multiple cutting edges which will remove material much faster. Double cut burs leave a smoother finish than standard cut burs because they produce smaller chips as they cut. The The Double cut profile provides better tool control in the removal of light-to-medium material, deburring, finishing and cleaning.
3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFL-0313-3-5 Metric

Cone Shaped Double Cut Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFL-0313-3-5


7.9mm cutting head dia. x 22.2mm length of cut, with 67mm overall length, Item No. WGFL-0822-6-5 Metric

Cone Shaped Double Cut Burs


7.9mm x 22.2mm x 67mm
with 6mm shank
Part#
WGFL-0822-6-5


9.5mm cutting head dia. x 27.0mm length of cut, with 71mm overall length, Item No. WGFL-1027-6-5 Metric

Cone Shaped Double Cut Burs


9.5mm x 27mm x 71mm
with 6mm shank
Part#
WGFL-1027-6-5


12.7mm cutting head dia. x 28.6mm length of cut, with 73mm overall length, Item No. WGFL-1329-6-5 Metric

Cone Shaped Double Cut Burs


12.7mm x 28.6mm x 73mm
with 6mm shank
Part#
WGFL-1329-6-5


• Standard Cut Burs

The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
3mm cutting head dia. x 12.7mm length of cut, with 38mm overall length, Item No. WGFL-0313-3-2 Metric

Cone Shaped Double Cut Burs


3mm x 12.7mm x 38mm
with 3mm shank
Part#
WGFL-0313-3-2


6mm cutting head dia. x 15.9mm length of cut, with 51mm overall length, Item No. WGFL-0616-6-2 Metric

Cone Shaped Standard Cut Burs


6mm x 15.9mm x 51mm
with 6mm shank
Part#
WGFL-0616-6-2


• Bear Cut

Basically a standard cutting tool, cuts are performed along the left-hand spiral. The design results in a finer finish, smaller shavings, and improved tool control.
9.5mm cutting head dia. x 27.0mm length of cut, with 71mm overall length, Item No. WGFL-1027-6-SY Metric

Cone Shaped Bear Cut Burs


9.5mm x 27mm x 71mm
with 6mm shank
Part#
WGFL-1027-6-SY


12.7mm cutting head dia. x 28.6mm length of cut, with 73mm overall length, Item No. WGFL-1329-6-SY Metric

Cone Shaped Bear Cut Burs


12.7mm x 28.6mm x 73mm
with 6mm shank
Part#
WGFL-1329-6-SY


• Aluma Cut

High-quality, Aluma cut, carbide burs can be used on aluminum, magnesium, soft steel, hard plastic, rubber, and wood. They provide easy chip flow and faster stock removal with little to no clogging.
9.5mm cutting head dia. x 27.0mm length of cut, with 71mm overall length, Item No. WGFL-1027-6-1 Metric

Cone Shaped Aluma Cut Burs


9.5mm x 27mm x 71mm
with 6mm shank
Part#
WGFL-1027-6-1


12.7mm cutting head dia. x 28.6mm length of cut, with 73mm overall length, Item No. WGFL-1329-6-1 Metric

Cone Shaped Aluma Cut Burs


12.7mm x 28.6mm x 73mm
with 6mm shank
Part#
WGFL-1329-6-1


Our Company
About DesignatronicsOur Management ApproachOur CertificationsPress Releases and Events
Brands
SDP/SI - Stock Drive Products / Sterling Instrument QTC METRIC GEARSQuality Bearings and ComponentsWYBUR Tools
General Information
Terms and ConditionsPrivacy PolicyCode of Conduct PolicyPaperless Invoices
Connect
FacebookInstagramLinkedinTwitter