WYBUR Tools 1-877-276-4787
   Products  Metric Ball Shaped Burs - Tungsten Carbide


Metric Ball Shaped Burs - Tungsten Carbide



Metric Ball Shaped Burs- Tungsten Carbide
The metric ball cutting head of the Ball Bur, is designed for deburring and finishing rounded openings and curvilinear surface profiles. They are used to remove excess material and sharp edges from machined components. Along with shaping bevels and other concave surfaces, the Ball Burs can also be used to enlarge holes. They attach to rotary power tools such as die grinders, high-speed engravers, and jewelers pendant drills. Their carbide head is hard and resists wear and heat.

  • Our Metric Carbide Ball Burs are available in 3mm and 6mm shank diameters.
  • Proudly made right here in the USA.

Download the Safety Data Sheet

Metric Carbide Ball / Rotary Files Data Sheet

Download the Product Data Sheet
for products and additional cut availabiltiy

Double Cut Burs (ADC)


Basically a standard cutting tool, cuts are performed along the left-hand spiral. The design results in a finer finish, smaller shavings, and improved tool control.
Ball Shaped Standard Cut Burs, 3mm x 3.2mm x 51mm, Metric, Item No. WGFD-0303-3-2

Metric

Ball Shaped Double Cut (ADC) Burs


3mm x 3.2mm x 51mm
with 3mm shank

Part# WGFD-0303-3-2

Ball Shaped Standard Cut Burs, Metric, Item No. WGFD-0303-3-2
Ball Shaped Double Cut (ADC) Burs, 3mm x 3.2mm x 51mm, with 3mm shank

Metric

Ball Double Cut (ADC) Burs


3mm x 3.2mm x 51mm
with 3mm shank

Part# WGFD-0303-3-5


Ball Shaped Double (ADC) Cut Burs, Metric, Item No. WGFD-0303-3-5
Ball Shaped Double Cut (ADC) Burs, 4.8mm x 4.8mm x 43mm, Metric, Item No. WGFD-0505-3-5

Metric

Ball Double Cut (ADC) Burs


4.8mm x 4.8mm x 43mm
with 3mm shank

Part# WGFD-0505-3-5



Ball Shaped Double Cut (ADC) Burs, Metric Item No. WGFD-0505-3-5
Ball Shaped Double Cut (ADC) Burs, 6.4mm x 6.4mm x 44mm, Metric, Item No. WGFD-0606-3-5

Metric

Ball Double Cut (ADC) Burs


6.4mm x 6.4mm x 44mm
with 3mm shanks

Part# WGFD-0606-3-5
Ball Shaped Double Cut (ADC) Burs, Metric Item No. WGFD-0606-3-5
Ball Shaped Double Cut (ADC) Burs, 6mm x 5.6mm x 51mm, Metric, SKU WGFD-0606-6-5

Metric

Ball Shaped Double Cut (ADC) Burs


6mm x 5.6mm x 51mm
with 6mm shank

Part# WGFD-0606-6-5

Ball Shaped Double Cut (ADC) Burs, Metric, SKU WGFD-0606-6-5
Ball Shaped Double Cut (ADC) Burs, 7.9mm x 7.9mm x 52mm, Metric, SKU WGFD-0808-6-5

Metric

Ball Shaped Double Cut (ADC) Burs


7.9mm x 7.9mm x 52mm
with 6mm shank

Part# WGFD-808-6-5

Ball Shaped Double Cut (ADC) Burs, Metric, SKU WGFD-0808-6-5
Ball Shaped Double Cut (ADC) Burs, 9.5mm x 7.9mm x 52mm, Metric, SKU WGFD-1008-6-5

Metric

Ball Shaped Double Cut (ADC) Burs


9.5mm x 7.9mm x 52mm
with 6mm shank

Part# WGFD-1008-6-5

Ball Shaped Double Cut (ADC) Burs, Metric, SKU WGFD-1008-6-5
Ball Shaped Double Cut (ADC) Burs, 12.7mm x 11.1mm x 56mm, Metric, SKU WGFD-1311-6-5

Metric

Ball Shaped Double Cut (ADC) Burs


12.7mm x 11.1mm x 56mm
with 6mm shank

Part# WGFD-1311-6-5

Ball Shaped Double Cut (ADC) Burs, Metric, SKU WGFD-1311-6-5
Ball Shaped Double Cut (ADC) Burs, 15.9mm x 14.3mm x 59mm, Metric, SKU WGFD-1614-6-5

Metric

Ball Shaped Double Cut (ADC) Burs


15.9mm x 14.3mm x 59mm
with 6mm shank

Part#
WWGFD-1614-6-5
Ball Shaped Double Cut (ADC) Burs, Metric, SKU WGFD-1614-6-5


Standard Cut Burs


The standard cut bur provides easy chip flow and faster material removal with little to no clogging. Can be used on aluminum, magnesium, soft steel, plastic, rubber and wood.
Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0303-3-2

Metric

Ball Shaped Standard Cut Burs


6mm x 5.6mm x 51mm
with 3mm shank

Part# WGFD-0303-3-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0303-3-2
Ball Shaped Standard Cut Burs, Metric, SKU GFD-0506-6-2

Metric

Ball Shaped Standard Cut Burs


4.8mm x 4.8mm x 43mm
with 6mm shank

Part# WGFD-0506-6-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0506-6-2
Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0506-6-2

Metric

Ball Shaped Standard Cut Burs


6mm x 5.6mm x 51mm
with 6mm shank

Part# WGFD-0606-6-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0606-6-2
Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0808-6-2

Metric

Ball Shaped Standard Cut Burs


7.9mm x 7.9mm x 52mm
with 6mm shank

Part# WGFD-0808-6-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-0808-6-2
Ball Shaped Standard Cut Burs, Metric, SKU WGFD-1008-6-2

Metric

Ball Shaped Standard Cut Burs


9.5mm x 7.9mm x 52mm
with 6mm shank

Part# WGFD-1008-6-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-1008-6-2
Ball Shaped Standard Cut Burs, Metric, SKU WGFD-1311-6-2

Metric

Ball Shaped Standard Cut Burs


12.7mm x 11.1mm x 56mm
with 6mm shank

Part# WGFD-1311-6-2

Ball Shaped Standard Cut Burs, Metric, SKU WGFD-1311-6-2

Bear/Shipyard Cut Burs (Heavy-Duty)


Basically a standard cutting tool, cuts are performed along the left-hand spiral. The design results in a finer finish, smaller shavings, and improved tool control.
Ball Shaped Bear/Shipyard Cut Burs, Metric, SKU WGFD-1008-6-SY

Metric

Ball Shaped Bear/Shipyard Cut Burs


9.5mm x 7.9mm x 52mm
with 6mm shank

Part#
WGFD-1008-6-SY

Ball Shaped Bear/Shipyard Cut Burs, Metric, SKU WGFD-1008-6-SY
Ball Shaped Bear/Shipyard Cut Burs, Metric, SKU WGFD-1614-6-SY

Metric

Ball Shaped Bear/Shipyard Cut Burs


15.9mm x 14.3mm x 59mm
with 6mm shank

Part#
WGFD-1614-6-SY

Ball Shaped Bear/Shipyard Cut Burs, Metric, SKU WGFD-1614-6-SY

Aluma Cut Burs (NF)


The Aluminum cut is designed for use on aluminum, magnesium, soft steel, hard plastic, rubber, and wood. Provides easy chip flow and faster stock removal with little or no clogging.
Ball Shaped Aluminum Cut Burs, Metric, SKU WGFD-1008-6-1

Metric

Ball Shaped Aluma Cut (NF) Burs


9.5mm x 7.9mm x 52mm
with 6mm shank

Part#
WGFD-1008-6-1

Ball Shaped Aluminum Cut Burs, Metric, SKU WGFD-1008-6-1

Chipbreaker Cut Burs


Our Chipbreaker Ball Shaped Burs are used for Deburring, milling, cleaning. Used for tempered, unhardened steel, cast steel, and weld seams.
Chipbreaker Metric Ball Shape Burs, 3mm cutting head dia. x 2.4mm length of cut, with 70mm overall length, Item No. WGFD-0203-3-38

Metric

Ball Shaped Chipbreaker Cut Burs


2.4mm x 3.2mm x 38mm
with 3mm shank

Part#
WGFD-0203-3-3

Chipbreaker Ball Shape Burs - Tungsten Carbide, Metric, Item No. WGFD-0203-3-38
Chipbreaker Metric Ball Shape Burs, 3.2mm cutting head dia. x 3.2mm length of cut, with 38mm overall length, Item No. WGFD-0303-3-38

Metric

Ball Shaped Chipbreaker Cut Burs


3mm x 3.2mm x 38mm
with 3mm shank

Part#
WGFD-0303-3-3

Chipbreaker Metric Ball Shape Burs, Metric, Item No. WGFD-0303-3-38
Chipbreaker Metric Ball Shape Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFD-0606-6-51

Metric

Ball Shaped Chipbreaker Cut Burs


6mm x 5.6mm x 51mm
with 6mm shank

Part#
WGFD-0606-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-0606-6-51
Chipbreaker Metric Ball Shape Burs, 7.9mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFD-0808-6-52

Metric

Ball Shaped Chipbreaker Cut Burs


7.9mm x 7.9mm x 52mm
with 6mm shank

Part#
WGFD-0808-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-0808-6-52
Chipbreaker Metric Ball Shape Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFD-1008-6-52

Metric

Ball Shaped Chipbreaker Cut Burs


9.5mm x 7.9mm x 52mm
with 6mm shank

Part#
WGFD-1008-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-1008-6-52
Chipbreaker Metric Ball Shape Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFD-1110-6-54

Metric

Ball Shaped Chipbreaker Cut Burs


11.1mm x 9.5mm x 54mm
with 6mm shank

Part#
WGFD-1110-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-1110-6-54
Chipbreaker Metric Ball Shape Burs, 12.7mm cutting head dia. x 11.1mm length of cut, with 56mm overall length, Item No. WGFD-1311-6-56

Metric

Ball Shaped Chipbreaker Cut Burs


12.7mm x 11.1mm x 56mm
with 6mm shank

Part#
WGFD-1311-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-1311-6-56
Chipbreaker Metric Ball Shape Burs, 15.9mm cutting head dia. x 14.3mm length of cut, with 70mm overall length, Item No. WGFD-1614-6-59

Metric

Ball Shaped Chipbreaker Cut Burs


15.9mm x 14.3mm x 59mm
with 6mm shank

Part#
WGFD-1614-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-1614-6-59
Chipbreaker Metric Ball Shape Burs, 9.5mm cutting head dia. x 38.1mm length of cut, with 70mm overall length, Item No. WGFD-1918-6-62

Metric

Ball Shaped Chipbreaker Cut Burs


19.1mm x 17.5mm x 62mm
with 6mm shank

Part#
WGFD-1918-6-3

Chipbreaker Metric Ball Shape Burs, Metric, Tungsten Carbide, Item No. WGFD-1918-6-62

Our Company
About DesignatronicsOur Management ApproachOur CertificationsPress Releases and Events
Brands
SDP/SI - Stock Drive Products / Sterling Instrument QTC METRIC GEARSQuality Bearings and ComponentsWYBUR Tools
General Information
Terms and ConditionsPrivacy PolicyCode of Conduct PolicyPaperless Invoices
Connect
FacebookInstagramLinkedinX (Twitter)